swissbianco
Mitglied
- Messages
- 1,842
hallo,
da es ernst wird mit der swissbianco custom version des vic oht pe red alox öffne ich diesen tread.
dieses messer ist customized, ich starte in den usa mit dem vic oht pe sg run messer, nehme die griffschalen ab und montiere dauerhaft cnc gefräste alugriffschalen (die herstellergarantie ist damit erloschen).
folgende features wird das ganze wohl haben:
oht glattschliff, korkenzieher, lasergravur/seriennummer
rot eloxierte alugriffschalen, waffel muster, alufarbiges schweizerkreuz und swissbianco.com
griffschale mit zusätzlichem kugelschreiber, zahnstocher und pinzette
griffschale mit clip
btr liefertermin so wird dies wohl nach weinachten sein, mein cnc zulieferer ist am abklären, kosten&liefertermin etc. zudem muss ich ausserhalb der schweiz sein um diese änderung an den messer vorzunehmen - in der schweiz verboten. kümmert mich nicht gross, werde es wohl eh in den usa ungestört in meiner neuen werkstatt machen.
poste falls es einen proto oder ein dxf etc gibt und auch wann das preorder geöffnet wird.
da ich irgendwo starten muss fiel die wahl auf rot eloxiertes aluminium, für meine studiensammlung werde ich auch eines in titan und g10 machen, zum test.
danke fürs interesse.
mfg
+B
____________________________________________________________
hello,
here some basic infos in english to that coming alox scaled oht:
as i met some skilled cnc millers close by my new shop in usa, i descided to try out first an new scale for the victorinox oht.
as i have opened an preorder now for the coming vic oht pe with stayglow scales, plain edge version, corkscrew, i will save some of that run for an upgrade to the mentioned red alox scales. those scales are swissbianco made and the altered vic knife has no factory warranty anymore...
the features of that knife will be:
vic oht, plain edge, corkscrew, laserengraved/serialnumber
red anodised aluminium scales, waffle pattern, alucolor swiss cross and swissbianco.com engraving
scale with additional pen, tweezers and toothpic
scale with pocketclip
the deliverytime is sceduled around christmas, according to the stupid swiss laws i have to alter those knives outside swiss, will do this in usa in freedom.
currently the us cnc miller has the infos and will quote, i will post in time any news and if i open the preorder.
im not sure if we will be able to make an proto with all the swiss difficulties but i will post pics, infos or at least an dxf drawing.
as we have to start somewhere, i have descided to make red alox first and say one proto in g10 and titanium, for my study collection and test.
as this forum is mainly in german, this are only the basic infos, in case you really need additional infos, please send me an email.
many thanks
+B
da es ernst wird mit der swissbianco custom version des vic oht pe red alox öffne ich diesen tread.
dieses messer ist customized, ich starte in den usa mit dem vic oht pe sg run messer, nehme die griffschalen ab und montiere dauerhaft cnc gefräste alugriffschalen (die herstellergarantie ist damit erloschen).
folgende features wird das ganze wohl haben:
oht glattschliff, korkenzieher, lasergravur/seriennummer
rot eloxierte alugriffschalen, waffel muster, alufarbiges schweizerkreuz und swissbianco.com
griffschale mit zusätzlichem kugelschreiber, zahnstocher und pinzette
griffschale mit clip
btr liefertermin so wird dies wohl nach weinachten sein, mein cnc zulieferer ist am abklären, kosten&liefertermin etc. zudem muss ich ausserhalb der schweiz sein um diese änderung an den messer vorzunehmen - in der schweiz verboten. kümmert mich nicht gross, werde es wohl eh in den usa ungestört in meiner neuen werkstatt machen.
poste falls es einen proto oder ein dxf etc gibt und auch wann das preorder geöffnet wird.
da ich irgendwo starten muss fiel die wahl auf rot eloxiertes aluminium, für meine studiensammlung werde ich auch eines in titan und g10 machen, zum test.
danke fürs interesse.
mfg
+B
____________________________________________________________
hello,
here some basic infos in english to that coming alox scaled oht:
as i met some skilled cnc millers close by my new shop in usa, i descided to try out first an new scale for the victorinox oht.
as i have opened an preorder now for the coming vic oht pe with stayglow scales, plain edge version, corkscrew, i will save some of that run for an upgrade to the mentioned red alox scales. those scales are swissbianco made and the altered vic knife has no factory warranty anymore...
the features of that knife will be:
vic oht, plain edge, corkscrew, laserengraved/serialnumber
red anodised aluminium scales, waffle pattern, alucolor swiss cross and swissbianco.com engraving
scale with additional pen, tweezers and toothpic
scale with pocketclip
the deliverytime is sceduled around christmas, according to the stupid swiss laws i have to alter those knives outside swiss, will do this in usa in freedom.
currently the us cnc miller has the infos and will quote, i will post in time any news and if i open the preorder.
im not sure if we will be able to make an proto with all the swiss difficulties but i will post pics, infos or at least an dxf drawing.
as we have to start somewhere, i have descided to make red alox first and say one proto in g10 and titanium, for my study collection and test.
as this forum is mainly in german, this are only the basic infos, in case you really need additional infos, please send me an email.
many thanks
+B