Inkster
Mitglied
- Messages
- 268
Hallo meierzwo,
die Probleme mit der Platine sind nur bei der D10 aufgetreten.
Eine Platinenrevision bei der EX10 ist mir nicht bekannt. Selbst wenn es eine gab, ist nicht zu erwarten, das es mit den "alten Platinen" bei der EX10 Probleme gibt.
Zumindest für die D10 habe ich irgendwo Vergleichsbilder gesehen, da muss ich mal eben nachsehen..........
Allerdings bin ich relativ sicher das alle problematischen Lampen von den "offiziellen Händlern" zurückgerufen wurden.
Edit:
Hier die Vergleichsbilder der D10:
zuerst alt dann neu
Hier noch die offizielle Stellungnahme von Nitecore:
Wenn ich das richtig verstehe, müsste es inzwischen sogar 3 Boardversionen geben.
die Probleme mit der Platine sind nur bei der D10 aufgetreten.
Eine Platinenrevision bei der EX10 ist mir nicht bekannt. Selbst wenn es eine gab, ist nicht zu erwarten, das es mit den "alten Platinen" bei der EX10 Probleme gibt.
Zumindest für die D10 habe ich irgendwo Vergleichsbilder gesehen, da muss ich mal eben nachsehen..........
Allerdings bin ich relativ sicher das alle problematischen Lampen von den "offiziellen Händlern" zurückgerufen wurden.
Edit:
Hier die Vergleichsbilder der D10:
zuerst alt dann neu
Hier noch die offizielle Stellungnahme von Nitecore:
Hi all
NiteCore Tactical Technology Co. LTD accords extremely strict quality standard. Concerning the new and old version circuit, please see following reply, thanks!
1. For the first batch of products, we have got about 3 feedback that there is "glow" issue with the light, i.e. when they turned off the light, it still has some dim light remain. We pay much attention to this issue, our engineers recheck the circuit, and think that it's the electromagnetic induction issue due to the close layout of circuit unit. In order to avoid such issues, we re-design the circuit topology, move some unit to the back of the circuit board, which comes the new version circuit.
2. After we ship the first batch of new circuit products to South Korea, our QC department manager found a potential problem with the new version circuit. When the circuit unit is under SMT, since one of the resistance use comparatively low precision products, which might cause windage in circuit output. Though this potential problem does not affect normal use (that's why we did not find this problem when QC the products), but we finally decide to call back this batch and destroy them.
3. There will be no differences between the new and old version circuits either in capability or function.
Thanks for your attention, and hope you can enjoy our products.
Wenn ich das richtig verstehe, müsste es inzwischen sogar 3 Boardversionen geben.
Last edited: