Messerbilder - Kein bestimmtes Thema

34910221nq.jpg
 
Je nach Gusto …

BRKT Imp: Gesamtlänge 15,8 cm - Klingenlänge 6 cm - 4,25 mm A2 Tool Steel - Full Hight Grind - Shallow convex
down to Zero - Spear Point - Full Tang - Black Canvas Micarta - Gesamtschneidenwinkel 25 Grad -
0,4 mm hinter der Wate - 125 Gramm

Fällkniven WM1: Gesamtlänge 17,2 cm - Klingenlänge 7 cm - 3,45 mm VG10-Laminat - Full Hight Grind - Shallow
convex down to Zero - Drop Point - Full Tang - Thermorun - Gesamtschneidenwinkel 22 Grad -
0,35 mm hinter der Wate - 75 Gramm

Fred Perrins Neck Bowie: Gesamtlänge 14,7 cm - Klingenlänge 6,5 cm - 3 mm Sandvik 12C27 - Minimal ballig mit
Mikro-Fase - Gesamtschneidenwinkel 25 Grad - 0,25 mm hinter der Wate - 40 Gramm

A2 Toolsteel: C: 0,95-1,05 Cr: 4,75-5,50 Mo: 0,90-1,40 Mn: 0,60-1,00 Si: 0,30-0,50 Ni: 0,30 Cu: 0,25 V: 0,20-0,25
Takefu VG10: C: 0,95-1,05 Cr: 14,50-15,50 Mo: 0,90-1,20 Mn: 0,50 V: 0,10-0,30
Sandvik 12C27: C:0,6 Cr: 13,5 Mn: 0,4 Si: 0,4


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC03933.jpg
    01 DSC03933.jpg
    338 KB · Views: 2,442
  • 02 DSC03910.jpg
    02 DSC03910.jpg
    379.2 KB · Views: 2,521
  • 03 DSC03912.jpg
    03 DSC03912.jpg
    373.3 KB · Views: 2,419
  • 04 DSC03901.jpg
    04 DSC03901.jpg
    355.4 KB · Views: 2,446
  • 05 DSC03882.jpg
    05 DSC03882.jpg
    326.2 KB · Views: 2,429
  • 06 DSC03853.jpg
    06 DSC03853.jpg
    351.2 KB · Views: 2,368
  • 07 DSC03893.jpg
    07 DSC03893.jpg
    392.9 KB · Views: 2,461
  • 08 DSC03916.jpg
    08 DSC03916.jpg
    333.2 KB · Views: 2,401
  • 09 DSC03922.jpg
    09 DSC03922.jpg
    324.1 KB · Views: 2,453
  • 10 DSC03986.jpg
    10 DSC03986.jpg
    371.8 KB · Views: 2,396
Fat Boys …

Böker Plus Albatros: Länge geschlossen 9,7 cm - Klingenlänge 6,6 cm - 5 mm VG-10 - Hohlschliff -
Titan-Framelock - 3,5 mm Titanschalen - Gesamtschneidenwinkel 40 Grad - 1 mm hinter der Wate -
167 Gramm - Design Jens Ansø

Spyderco Techno: Länge geschlossen 8,7 cm - Klingenlänge 6,5 cm - 4,5 mm Carpenter CTS-XHP -
Flachschliff mit (jetzt) balliger Fase - Titan-Framelock - 3 mm Titanschalen - Gesamtschneidenwinkel
30 Grad - 0,7 mm hinter der Wate - 100 Gramm - Design Marcin Slysz

Little Red Rock: Länge geschlossen 7 cm - Klingenlänge 5 cm - 4 mm Böhler M390 Microclean -
Hohlschliff mit (jetzt) balliger Fase - Titan-Framelock - 3 mm Titan-/G10-Schalen -
Gesamtschneidenwinkel (jetzt) 25 Grad - 0,75 mm hinter der Wate - 65 Gramm

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC03995.jpg
    01 DSC03995.jpg
    366.3 KB · Views: 2,352
  • 02 DSC03994.jpg
    02 DSC03994.jpg
    395 KB · Views: 2,341
  • 03 DSC04010.jpg
    03 DSC04010.jpg
    330.3 KB · Views: 2,342
  • 04 DSC04016.jpg
    04 DSC04016.jpg
    344.8 KB · Views: 2,322
  • 05 DSC04018.jpg
    05 DSC04018.jpg
    347.6 KB · Views: 2,310
  • 06 DSC04043.jpg
    06 DSC04043.jpg
    344.6 KB · Views: 2,294
  • 07 DSC04000.jpg
    07 DSC04000.jpg
    380.4 KB · Views: 2,330
  • 08 DSC04024.jpg
    08 DSC04024.jpg
    339.4 KB · Views: 2,337
  • 09 DSC04031.jpg
    09 DSC04031.jpg
    389.2 KB · Views: 2,343
  • 10 DSC4095.jpg
    10 DSC4095.jpg
    322.2 KB · Views: 2,284
Last edited:
Mirror Polish versus No Glare Finish ...

Schanz / Pose Featherweight: Gesamtlänge 18 cm - Klingenlänge 9 cm - 4 mm SB1 aka Niolox - Hohlschliff - Spiegelpoliert -
Gesamtschneidenwinkel 20 Grad - 0,3 bis 0,4 mm hinter der Wate - 113 Gramm - Lederscheide von Stefan Kleinhuber

Winkler WK II Blue Ridge Hunter: Gesamtlänge 20,3 cm - Klingenlänge 10,5 cm - 5,4 mm 80CrV2 - Dezent konvex mit
Fase von etwa 1mm - No Glare Caswell Finish - Full Tang skelettiert - Gesamtschneidenwinkel 30 Grad -
0,7 mm hinter der Wate - 162 Gramm

SB1 / 1.4153.03: C: 0,8 Cr: 12,7 Mo: 1,1 V: 0,9 Nb: 0,7
80CrV2 / 1.2235: C:0,8 Cr:0,5 Mn:0,5 Si:0,3 V:0,15%


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04287.jpg
    01 DSC04287.jpg
    373.9 KB · Views: 2,209
  • 02 DSC04289.jpg
    02 DSC04289.jpg
    373.9 KB · Views: 2,258
  • 03 DSC04123.jpg
    03 DSC04123.jpg
    392 KB · Views: 2,229
  • 04 DSC04177.jpg
    04 DSC04177.jpg
    339.5 KB · Views: 2,243
  • 05 DSC04236.jpg
    05 DSC04236.jpg
    353.3 KB · Views: 2,227
  • 06 DSC04226.jpg
    06 DSC04226.jpg
    382.5 KB · Views: 2,288
  • 07 DSC04278.jpg
    07 DSC04278.jpg
    378.2 KB · Views: 2,199
  • 08 DSC04198.jpg
    08 DSC04198.jpg
    361.3 KB · Views: 2,227
  • 09 DSC04140.jpg
    09 DSC04140.jpg
    333.8 KB · Views: 2,160
  • 10 DSC04317.jpg
    10 DSC04317.jpg
    367.7 KB · Views: 2,158
Giftige Spinne & Gemeine Ameise :adoration: …

Spyderco Street Beat: Gesamtlänge 18 cm - Klingenlänge 8,5 cm - 4 mm VG-10 - Flachschliff mit Mikro-V-Fase - Black Micarta
(hochfein poliert) - Gesamtschneidenwinkel 30 Grad - 0,45 mm hinter der Wate - 90 Gramm - Design Fred Perrin

Rat Cutlery ESEE Izula I: Gesamtlänge 15,9 cm - Klingenlänge 7,3 cm - 3 mm 1095 (beschichtet) - Flachschliff mit V-Fase -
“Strickjacke” von mir - Gesamtschneidenwinkel 25 Grad - 0,7 mm hinter der Wate - 65 Gramm (inkl. Jacke)

Takefu VG-10: C: 0,95-1,05 Cr: 14,50-15,50 Mo: 0,90-1,20 Mn: 0,50 V: 0,10-0,30
1095: C: 0,90-1.03 Mn: 0,30-0,50


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n’R
 

Attachments

  • 01 DSC04348.jpg
    01 DSC04348.jpg
    395 KB · Views: 2,156
  • 02 DSC04398.jpg
    02 DSC04398.jpg
    378.2 KB · Views: 2,153
  • 03 DSC04414.jpg
    03 DSC04414.jpg
    368.6 KB · Views: 2,103
  • 04 DSC04394.jpg
    04 DSC04394.jpg
    324.9 KB · Views: 2,087
  • 05 DSC04452.jpg
    05 DSC04452.jpg
    346.7 KB · Views: 2,108
  • 06 DSC04404.jpg
    06 DSC04404.jpg
    337 KB · Views: 2,240
  • 07 DSC04381.jpg
    07 DSC04381.jpg
    362.1 KB · Views: 2,097
  • 08 DSC04406.jpg
    08 DSC04406.jpg
    330 KB · Views: 2,068
  • 09 DSC04417.jpg
    09 DSC04417.jpg
    312.8 KB · Views: 2,104
  • 10 DSC04506.jpg
    10 DSC04506.jpg
    321 KB · Views: 2,157
American Minis …

Microtech Mini Socom Combo Tanto (silver): Länge geschlossen 10,3 cm - Klingenlänge 8,2 cm - 3,15 mm Crucible 154 CM -
Flachschliff mit V-Fase - Tanto / Teilwelle - Titan-Linerlock - Anodisiertes Aluminium mit Kraton-Einlagen -
Gesamtschneidenwinkel 0,25 Grad - 0,55 mm hinter der Wate - 70 Gramm

Emerson Mini A-100: Länge geschlossen 10,3 cm - Klingenlänge 7,8 cm - 3,17 mm Crucible 154 CM - "Ab Werk" Conventional
V-Grind w/ Chisel Edge (jetzt Shallow convex Scandi down to Zero) - Titan-Linerlock - Black G10 (entschärft) -
Gesamtschneidenwinkel jetzt 30 Grad - 0,4 mm hinter der Wate (0,85 ab Werk) - 100 Gramm

Crucible 154 CM: C: 1,05 Cr: 13,50-14,00 Mo: 4,00 Mn: 0,50 Si: 0,30-0,80 V: 0,00-0,40 W: 0,00-0,40

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04514.jpg
    01 DSC04514.jpg
    395.2 KB · Views: 2,037
  • 02 DSC04510.jpg
    02 DSC04510.jpg
    377.3 KB · Views: 2,054
  • 03 DSC04534.jpg
    03 DSC04534.jpg
    352.6 KB · Views: 2,006
  • 04 DSC04585.jpg
    04 DSC04585.jpg
    393 KB · Views: 2,045
  • 05 DSC04590.jpg
    05 DSC04590.jpg
    347.8 KB · Views: 2,019
  • 06 DSC04539.jpg
    06 DSC04539.jpg
    334 KB · Views: 1,970
  • 07 DSC04542.jpg
    07 DSC04542.jpg
    333.8 KB · Views: 2,073
  • 08 DSC04589.jpg
    08 DSC04589.jpg
    380.9 KB · Views: 2,009
  • 09 DSC04601.jpg
    09 DSC04601.jpg
    364.5 KB · Views: 1,983
  • 10 DSC04647.jpg
    10 DSC04647.jpg
    330.4 KB · Views: 1,970
Last edited:
Boy George …

Zero Tolerance ZT 0900: Länge geschlossen 9,8 cm - Klingenlänge 6,9 cm - 4 mm CPM S35VN - Flachschliff mit V-Fase -
Flipper mit KVT Ball-Bearing System - Titan-Framelock mit Steel Insert (gleichzeitig Lock Bar Stabilizer) -
Gesamtschneidenwinkel 30 Grad - 0,7 mm hinter der Wate - 125 Gramm - Design Les George

Les George Mid Tech VECP 2.0: Länge geschlossen 12,4 cm - Klingenlänge 86 mm - 3,8 mm CTS-XHP - Flachschliff mit
V-Fase - Titan-Framelock - Gesamtschneidenwinkel 30 Grad - 0,6 mm hinter der Wate - 158 Gramm

Mit dabei zur Orientierung das Para 3 CPM CRU-WEAR

Crucible CPM S35VN: C: 1,34 Cr: 14,00 Mo: 2,00 Mn: 0,50 Si: 0,50 Co: 0,00-0,50 Ni: 0,10-0,40 Nb: 0,50 V: 3,00 W: 0,40
Carpenter CTS-XHP: C: 1,60 Cr: 16,00 Mo: 0,80 Mn: 0,50 Ni: 0,35 Si: 0,40 V: 0,45


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04666.jpg
    01 DSC04666.jpg
    373.3 KB · Views: 1,928
  • 02 DSC04669.jpg
    02 DSC04669.jpg
    324.1 KB · Views: 1,906
  • 03 DSC04672.jpg
    03 DSC04672.jpg
    389.5 KB · Views: 1,961
  • 04 DSC04674.jpg
    04 DSC04674.jpg
    371.9 KB · Views: 1,932
  • 05 DSC04692.jpg
    05 DSC04692.jpg
    349.5 KB · Views: 1,928
  • 06 DSC04702.jpg
    06 DSC04702.jpg
    392.4 KB · Views: 1,874
  • 07 DSC04698.jpg
    07 DSC04698.jpg
    328 KB · Views: 1,930
  • 08 DSC04741.jpg
    08 DSC04741.jpg
    311.2 KB · Views: 1,901
  • 09 DSC04729.jpg
    09 DSC04729.jpg
    343.1 KB · Views: 1,927
  • 10 DSC04766.jpg
    10 DSC04766.jpg
    354.6 KB · Views: 1,931
Last edited:
The fast lane …

Zero Tolerance ZT 566: Länge geschlossen 11,3 cm - Klingenlänge 8,25 cm - 3 mm Böhler-Uddeholm Elmax -
Flachschliff mit V-Fase - Stahl-Framelock - Flipper mit Assisted Opener (SpeedSafe) - Gesamtschneidenwinkel
30 Grad - 0,7 mm hinter der Wate - 150 Gramm - Design Rick Hinderer

Zero Tolerance ZT 560: Länge geschlossen 13 cm - Klingenlänge 9,5 cm - 4 mm Böhler-Uddeholm Elmax -
Flachschliff mit V-Fase - Titan-Framelock - Flipper mit Kugellager - Gesamtschneidenwinkel 30 Grad -
0,7 mm hinter der Wate - 170 Gramm - Design Rick Hinderer

Das Para Millie 2 CRU-WEAR zur Orientierung

Böhler-Uddeholm Elmax: C: 1,70 Cr: 18,00 Mo: 1,00 Mn: 0,30 Si: 0,80 V: 3,00

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04783.jpg
    01 DSC04783.jpg
    363.6 KB · Views: 1,813
  • 02 DSC04787.jpg
    02 DSC04787.jpg
    384.4 KB · Views: 1,847
  • 03 DSC04789.jpg
    03 DSC04789.jpg
    372.1 KB · Views: 1,814
  • 04 DSC04792.jpg
    04 DSC04792.jpg
    330.5 KB · Views: 1,827
  • 05 DSC04797.jpg
    05 DSC04797.jpg
    336.3 KB · Views: 1,830
  • 06 DSC04806.jpg
    06 DSC04806.jpg
    388.9 KB · Views: 1,807
  • 07 DSC04820.jpg
    07 DSC04820.jpg
    389.9 KB · Views: 1,823
  • 08 DSC04829.jpg
    08 DSC04829.jpg
    380.7 KB · Views: 1,787
  • 09 DSC04845.jpg
    09 DSC04845.jpg
    348.2 KB · Views: 1,779
  • 10 DSC04864.jpg
    10 DSC04864.jpg
    354.7 KB · Views: 1,795
Fasenverschiebung …

Spyderco Native 5: Länge geschlossen 10,2 cm - Klingenlänge 7,6 cm - 3 mm CPM S35VN - Flachschliff mit V-Fase (jetzt mit
Fase ballig auf Null) - Distal Tapered Blade - Backlock - Peel-Ply G10 (taschenfreundlich entschärft) -
Gesamtschneidenwinkel 20 Grad - 0,4 mm hinter der Wate - 103 Gramm

Spyderco Para 3: Länge geschlossen 10,9 cm - Klingenlänge 7,5 cm - 3,68 mm CPM S30V - Flachschliff mit V-Fase - Distal
Tapered Blade - Compression Lock - Peel-Ply G10 (taschenfreundlich entschärft) -
Gesamtschneidenwinkel 30 Grad - 0,6 mm hinter der Wate - 97 Gramm

Spyderco Para Millie 2: Länge geschlossen 12,2 cm - Klingenlänge 8,8 cm - 3,7 mm CPM S30V - Flachschliff mit V-Fase
(leicht ballig) - Distal Tapered Blade - Compression Lock - Peel-Ply G10 (taschenfreundlich entschärft) -
Gesamtschneidenwinkel 30 Grad - 0,7 mm hinter der Wate - 110 Gramm

Crucible CPM S30V: C: 1,45-1,46 Cr: 14,00 Mo: 2,00 Mn: 0,50 Si: 0,50 N: 0,10 V: 4,00 W: 0,10-0,40
Crucible CPM S35VN: C: 1,34 Cr: 14,00 Mo: 2,00 Mn: 0,50 Si: 0,50 Co: 0,00-0,50 Ni: 0,10-0,40 Nb: 0,50 V: 3,00 W: 0,40


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04878.jpg
    01 DSC04878.jpg
    378.7 KB · Views: 1,732
  • 02 DSC04879.jpg
    02 DSC04879.jpg
    375.9 KB · Views: 1,768
  • 03 DSC04883.jpg
    03 DSC04883.jpg
    395.7 KB · Views: 1,793
  • 04 DSC04890.jpg
    04 DSC04890.jpg
    339.9 KB · Views: 1,778
  • 05 DSC04893.jpg
    05 DSC04893.jpg
    341.6 KB · Views: 1,873
  • 06 DSC04895.jpg
    06 DSC04895.jpg
    355.8 KB · Views: 1,762
  • 07 DSC04914.jpg
    07 DSC04914.jpg
    378.3 KB · Views: 1,713
  • 08 DSC04910.jpg
    08 DSC04910.jpg
    386.2 KB · Views: 1,781
  • 09 DSC04951.jpg
    09 DSC04951.jpg
    306.9 KB · Views: 1,717
  • 10 DSC04986.jpg
    10 DSC04986.jpg
    367.6 KB · Views: 1,738
You can horse these knives …

Terävä Jääkäripuukko 110: Gesamtlänge 24 cm - Klingenlänge 11 cm - 4,2 mm 80CrV2 (59 HRC) - High Scandi mit Mikrofase -
Full Tang - Gummierter Griff - Gesamtschneidenwinkel 23 Grad - 0,4 mm hinter der Wate - 175 Gramm

BRKT Ultra-Lite Bushcrafter (ULB): Gesamtlänge 18,8 cm - Klingenlänge 8,4 cm - 2,25 mm CPM 3V (58-60 HRC) -
Konvexer Scandi (Scandivex) auf Null - Full Tang - Black Canvas Micarta - Gesamtschneidenwinkel 25 Grad -
0,4 mm hinter der Wate - 75 Gramm

Mit dabei das Fällkniven F1

80CrV2: C: 0,45-1,00 Cr: 0,40-1,20 Mo: 0,10-0,25 Mn: 0,10-0,90 Si: 0,15-0,50 Ni: 0,00-0,40 Cu: 0,00-0,25 V: 0,10-0,30
CPM 3V: C: 0,80 Cr: 7,50 Mo: 1,30 Mn: 0,40 Si: 0,90 V: 2,75-3,00 W: 0,40 max


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R'n'R
 

Attachments

  • 01 DSC04997.jpg
    01 DSC04997.jpg
    380.4 KB · Views: 1,663
  • 02 DSC05017.jpg
    02 DSC05017.jpg
    385.9 KB · Views: 1,740
  • 03 DSC05048.jpg
    03 DSC05048.jpg
    378.4 KB · Views: 1,690
  • 04 DSC05052.jpg
    04 DSC05052.jpg
    348.6 KB · Views: 1,672
  • 05 DSC05035.jpg
    05 DSC05035.jpg
    382.3 KB · Views: 1,673
  • 06 DSC05057.jpg
    06 DSC05057.jpg
    359.3 KB · Views: 1,744
  • 07 DSC05055.jpg
    07 DSC05055.jpg
    360.8 KB · Views: 1,674
  • 08 DSC05022.jpg
    08 DSC05022.jpg
    374.3 KB · Views: 1,654
  • 09 DSC05045.jpg
    09 DSC05045.jpg
    316.2 KB · Views: 1,686
  • 10 DSC05077.jpg
    10 DSC05077.jpg
    391.1 KB · Views: 1,662
Red Alert :)

Haslauer SHBBS: Black G10 - 5,4 mm Böhler M390 Microclean
Haslauer SBH: Red G10 - 4 mm Lohmann Niolox aka 1.4153.03 aka SB1

SB1: C: 0,8 Cr: 12,7 Mo: 1,1 V: 0,9 Nb: 0,7
M390: C: 1,90 Cr: 20 Mo: 1,00 Mn: 0,30 Si: 0,70 V: 4,00 W: 0,60

attachment.php


Bom fim de semana, R’n‘R
 

Attachments

  • 28  ND6_7754-3.jpg
    28 ND6_7754-3.jpg
    169.8 KB · Views: 1,637
Werkzeuge für Kaltarbeit ;)

Boll Sündenbock: Steinbockhorn, Kupferpins, 1.2516
Boll Tommi Puukko: Lederscheiben, Kupfermontur, 1.2552

1.2516 aka 120WV4: C: 1,2 Cr: 0,2 Mn: 0,3 Si: 0,2 V: 0,1 W: 1,0 (Silberstahl)
1.2552 aka 80WCrV8: C: 0.75-0.85 Cr: 1.00-1.20 Mn: 0.30-0.50 Si: 0.40-0.60 V: 0.25-0.35 W: 1.80-2.10

attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC06117.jpg
    01 DSC06117.jpg
    286.7 KB · Views: 1,570
  • 02 DSC06132.jpg
    02 DSC06132.jpg
    294.7 KB · Views: 1,542
  • 03 DSC06123.jpg
    03 DSC06123.jpg
    264.7 KB · Views: 1,555
Wolfram rules …

Thai Breaker von Daniel Jeremiah Boll: Ceylon Eisenholz & 1.2442 - Unter 20 Grad Gesamtschneidenwinkel -
0,3 mm hinter der Wate …

1.2442 aka 115 W 8: C: 1,15 Si: 0,25 Mn: 0,35 Cr: 0,2 W: 1,8-2,1

attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC01547.jpg
    01 DSC01547.jpg
    180.7 KB · Views: 1,560
  • 02 DSC01627.jpg
    02 DSC01627.jpg
    169 KB · Views: 1,511
  • 03 DSC01629.jpg
    03 DSC01629.jpg
    164.7 KB · Views: 1,550
Verspielt …

Redrocka von Daniel Jeremiah Boll: Padoukwurzel - 1.2442 - Gesamtschneidenwinkel 20 Grad - 0,3 mm hinter der Wate
Kleiner Taschen-Klapp-Jäger von Uli Hennicke: Grenadill - 1.2519 - Gesamtschneidenwinkel 20 Grad - 0,3 mm hinter der Wate

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04677.jpg
    01 DSC04677.jpg
    341.4 KB · Views: 1,508
  • 02 DSC04681.jpg
    02 DSC04681.jpg
    350.6 KB · Views: 1,449
  • 03 DSC04672.jpg
    03 DSC04672.jpg
    209.1 KB · Views: 1,481
  • 04 ND6_6899 c.jpg
    04 ND6_6899 c.jpg
    357.7 KB · Views: 1,446
  • 05 DSC05975.jpg
    05 DSC05975.jpg
    332.6 KB · Views: 1,439
  • 06 DSC05965.jpg
    06 DSC05965.jpg
    338.5 KB · Views: 1,454
  • 07 DSC04449.jpg
    07 DSC04449.jpg
    332.3 KB · Views: 1,522
  • 08 DSC06184 b.jpg
    08 DSC06184 b.jpg
    292.9 KB · Views: 1,485
  • 09 DSC06237 b.jpg
    09 DSC06237 b.jpg
    306.1 KB · Views: 1,496
Nehmt dies ...

Thai Breaker: Ceylon Eisenholz - 1.2442
Sündenbock: Steinbockhorn - 1.2516
Fischhautklapper: Wüsteneisenholz - Gesenkstahl 1.2721
Fire Groover: Padoukwurzel - 1.2513
Redrocka: Padoukwurzel - 1.2442

attachment.php


Carbonara, R’n‘R
 

Attachments

  • 00 DSC05417.jpg
    00 DSC05417.jpg
    166.8 KB · Views: 1,419
Klassiker unter sich …

Opinel No.08: Handarbeit von Attila Kovács - Carbone
Higonokami: Messingblech - Carbon - Skarabäus

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC05323.jpg
    01 DSC05323.jpg
    395.7 KB · Views: 1,384
  • 02 DSC05348.jpg
    02 DSC05348.jpg
    354.1 KB · Views: 1,336
  • 03 DSC05342.jpg
    03 DSC05342.jpg
    362 KB · Views: 1,399
  • 04 DSC05326.jpg
    04 DSC05326.jpg
    323.5 KB · Views: 1,310
  • 05 DSC05340.jpg
    05 DSC05340.jpg
    367.9 KB · Views: 1,378
  • 07 DSC05332.jpg
    07 DSC05332.jpg
    327.4 KB · Views: 1,319
  • 08 DSC05333.jpg
    08 DSC05333.jpg
    339.1 KB · Views: 1,298
  • 09 DSC05345.jpg
    09 DSC05345.jpg
    343.1 KB · Views: 1,313
Pitbull mit Seekuh …

Jeremy Robertson‘s El Patron Gen. 2: Länge geschlossen 12,1 cm - Klingenlänge 9,5 cm - 4,5 mm CPM 3V - Full Hight
Convex Grind (Down to Zero: Piranha-Mod) - Titan-Framelock - Gesamtschneidenwinkel 20 Grad -
0,3 mm hinter der Wate - 188 Gramm

Frobergsche Seekuh: Länge geschlossen 12,4 cm - Klingenlänge 10,4 cm - 3,6 mm 1.2442 - Flachschliff mit Fase
ballig auf Null - Eingelegte Feder - Seekuh-Knochen - Gesamtschneidenwinkel 20 Grad -
0,3 mm hinter der Wate - 171 Gramm

Crucible CPM 3V: C: 0,8 Cr: 7,5 Mo: 1,3 V: 2,75
1.2442 aka 115 W 8: C: 1,15 Si: 0,25 Mn: 0,35 Cr: 0,2 W: 1,8-2,1


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n’R
 

Attachments

  • 01 DSC05362.jpg
    01 DSC05362.jpg
    369.6 KB · Views: 1,273
  • 02 DSC05363.jpg
    02 DSC05363.jpg
    385.6 KB · Views: 1,247
  • 03 DSC05367.jpg
    03 DSC05367.jpg
    389.2 KB · Views: 1,253
  • 04 DSC05369.jpg
    04 DSC05369.jpg
    390.6 KB · Views: 1,250
  • 05 DSC05372.jpg
    05 DSC05372.jpg
    328.2 KB · Views: 1,252
  • 07 DSC05375.jpg
    07 DSC05375.jpg
    310.5 KB · Views: 1,282
  • 08 DSC05378.jpg
    08 DSC05378.jpg
    375.4 KB · Views: 1,249
  • 09 DSC05389.jpg
    09 DSC05389.jpg
    329.2 KB · Views: 1,305
  • 10 DSC05401.jpg
    10 DSC05401.jpg
    398.9 KB · Views: 1,294
Jeremy Robertson, Calavera Cutlery: Like all my knives, every part of this knife is fabricated by me …

Hier nochmal der Patron am Kiefernholz im Jahr 2016. Und zusammen mit Model 4 in der alten Erzmine São Domingos.
Nicht meins leider. Es gehört JensH, der es 2017 bei seinem Besuch hier dabei hatte.

Calavera Model 4: Länge geschlossen 11,2 cm - Klingenlänge 8,9 cm - 4 mm Carpenter CTS-XHP - Hand Ground Blade -
Mid Height Hollow Grind - Long Custom Swedge - Titan-Framelock …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


Bom fim de semana, R’n’R
 

Attachments

  • 01 DSC01705.jpg
    01 DSC01705.jpg
    382.9 KB · Views: 1,243
  • 02 DSC01724.jpg
    02 DSC01724.jpg
    365.9 KB · Views: 1,201
  • 03 DSC01726.jpg
    03 DSC01726.jpg
    352.8 KB · Views: 1,195
  • 04 DSC03479.jpg
    04 DSC03479.jpg
    312.9 KB · Views: 1,229
  • 05 DSC03481.jpg
    05 DSC03481.jpg
    329.6 KB · Views: 1,201
  • 06 DSC03488.jpg
    06 DSC03488.jpg
    347.7 KB · Views: 1,206
  • 07 DSC03497.jpg
    07 DSC03497.jpg
    321.6 KB · Views: 1,217
  • 08 DSC03499.jpg
    08 DSC03499.jpg
    332.4 KB · Views: 1,184
Als Jens mich im April 2017 in Begleitung von Sohn Ben besucht hat, waren noch ein paar weitere Messerchen im Koffer.
Wir haben in der alten Mine São Domingos zusammen aufgelegt, was wir derzeit von Daniel Jeremiah Boll und
Thomas Froberg anzubieten hatten. Ich zeige die Bilder hier gern noch einmal :)

Auf dem 4. Bild von links nach rechts:

01. Boll, Sambar, 2519 (Jens)
02. Boll, Mufflon, 2442 (Jens)
03. Boll, Ceylon Eisenholz, 2513 (Fire Groover R’n’R)
04. Boll, Seekuh, 2442 (Bens Messer)
05. Boll, Steinbockhorn, 2516 (Sündenbock R’n’R)
06. Boll, Perlmutt, 2442 (Jens)
07. Boll, Seekuh, 2516 (kleinster Templer Jens)
08. Boll, Padouk, 2442 (Schnitzmesser Jens)
09. Froberg, Seekuh, 2442 (Frobergsche Seekuh R’n’R)
10. Froberg, Giraffen-Schienbeinknochen, 2519 (Jens)
11. Boll, Padouk, 2442 (Jens)
12. Boll, Padouk, 2442 (Redrocka R’n’R)
13. Froberg, Walroßzahn, 2442 (R’n‘R)
14. Boll, Wüsteneisenholz, 2721 (Fischhautklapper R’n’R)
15. Boll, Ceylon Eisenholz, 2442 (Thai Breaker R’n’R)

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC03396.jpg
    01 DSC03396.jpg
    349.5 KB · Views: 1,166
  • 02 DSC03407.jpg
    02 DSC03407.jpg
    343.4 KB · Views: 1,171
  • 03 DSC03409.jpg
    03 DSC03409.jpg
    364.6 KB · Views: 1,176
  • 04 DSC03465.jpg
    04 DSC03465.jpg
    349.6 KB · Views: 1,211
  • 05 DSC03458.jpg
    05 DSC03458.jpg
    320 KB · Views: 1,129
  • 06 DSC03414.jpg
    06 DSC03414.jpg
    324.7 KB · Views: 1,172
  • 07 DSC03417.jpg
    07 DSC03417.jpg
    396.2 KB · Views: 1,133
  • 08 DSC03421.jpg
    08 DSC03421.jpg
    394.3 KB · Views: 1,139
  • 09 DSC03425.jpg
    09 DSC03425.jpg
    395.6 KB · Views: 1,166
  • 10 DSC03426.jpg
    10 DSC03426.jpg
    340.2 KB · Views: 1,126
  • 11 DSC03430.jpg
    11 DSC03430.jpg
    337.3 KB · Views: 1,164
  • 12 DSC03433.jpg
    12 DSC03433.jpg
    323.5 KB · Views: 1,185
  • 13 DSC03436.jpg
    13 DSC03436.jpg
    399.9 KB · Views: 1,137
  • 14 DSC03443.jpg
    14 DSC03443.jpg
    347.9 KB · Views: 1,211
  • 15 DSC03450.jpg
    15 DSC03450.jpg
    329.9 KB · Views: 1,152
  • 16 DSC03452.jpg
    16 DSC03452.jpg
    390.7 KB · Views: 1,147
  • 17 DSC03466.jpg
    17 DSC03466.jpg
    343 KB · Views: 1,139
  • 18 DSC03472.jpg
    18 DSC03472.jpg
    394.8 KB · Views: 1,165
Back