Messerbilder - Kein bestimmtes Thema

Fred Perrins Neck Bowie. Bei mir als Taschen-Bowie im Gebrauch. Noch in der guten alten Sandvik-12C27-Ausführung. Die Standard-Neck-Bowies haben heute eine Klinge aus 440C und kosten so um die 60,- Euro. Für eines mit der 12C27-Klinge legt man 100,- Euro und mehr auf den Tisch. Bei lamnia z.B. …

Ich mag den 12C27 sehr. Neben SB1 und Crucible CPM 3V mein Lieblings-Rostträger. Das Neck Bowie liegt immer irgendwo griffbereit: Mit 2,8 mm Klinge, 1,4 mm auf 1 cm Höhe und 0,25 mm hinter der Wate ein ausgesprochen schneidfreudiges Messerchen. Fast auf Null ausgeschliffen …

attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04824.jpg
    01 DSC04824.jpg
    279.5 KB · Views: 1,569
  • 02 DSC04826.jpg
    02 DSC04826.jpg
    277 KB · Views: 1,635
  • 03 DSC04823.jpg
    03 DSC04823.jpg
    300.3 KB · Views: 1,563
Fred Perrin Custom Neck Bowie. Bei mir ebenfalls als Taschen-Bowie in Gebrauch. Etwas stabiler als das Standard: In der Klingenmitte 3,35 mm, auf 1 cm Höhe 1,9 und hinter der Wate 0,25 mm. Von oben runter ballig auf definitiv Null ausgeschliffener XC75. Perrin-typisches robustes Klingenfinish …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • DSC04841.jpg
    DSC04841.jpg
    373.2 KB · Views: 1,490
  • DSC04843.jpg
    DSC04843.jpg
    326.6 KB · Views: 1,601
  • DSC04848.jpg
    DSC04848.jpg
    388.5 KB · Views: 1,554
  • DSC04852.jpg
    DSC04852.jpg
    386 KB · Views: 1,502
  • DSC04867.jpg
    DSC04867.jpg
    344.1 KB · Views: 1,503
Froberg‘s Finest

Stattliche 12,5 cm Klinge aus dem legendären Monsterdamastpaket u.a. Achim Wirtz. Feinste Stellersche Seekuh von Michael Schick.

Vom Meister der Präzision mit Sonnenschliff auf den blau anodisierten Titanlinern versehen.

Mehr geht nicht.


w9en4q4j.jpg
 
Last edited:
Genau, Froberg :) !!

Der Abschluß meiner Walroßzahn-Trilogie. Hochleistungswerkzeug mit beispielhafter Geometrie. Gefertigt auf höchstem Präzisionsniveau. Klinge aus 1.2552. Sonnenschliff auf den Platinen. Ein Biest …

attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • DSC01594.jpg
    DSC01594.jpg
    321.1 KB · Views: 1,500
  • DSC01811.jpg
    DSC01811.jpg
    313.8 KB · Views: 1,512
  • DSC01852.jpg
    DSC01852.jpg
    270.8 KB · Views: 1,571
Mein erster von Thomas - die Frobergsche Seekuh. Nobel-Workhorse mit einem Gesamtschneidenwinkel von 20 Grad. Mit seiner 3,6-mm-Klinge der Länge 10,4 cm für mich die Obergrenze.

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04896.jpg
    01 DSC04896.jpg
    295.5 KB · Views: 1,347
  • 02 DSC04918.jpg
    02 DSC04918.jpg
    268.1 KB · Views: 1,414
  • 03 DSC04903.jpg
    03 DSC04903.jpg
    293.4 KB · Views: 1,349
  • 04 DSC04913.jpg
    04 DSC04913.jpg
    390.6 KB · Views: 1,345
  • 05 DSC04922.jpg
    05 DSC04922.jpg
    267.9 KB · Views: 1,457
„Mein erster von Thomas - die Frobergsche Seekuh. Nobel-Workhorse mit einem Gesamtschneidenwinkel von 20 Grad. Mit seiner 3,6-mm-Klinge der Länge 10,4 cm für mich die Obergrenze. „

Dein Nobel-Workhorse wäre mein Ideal Standard, wenn ich mich nur für ein einziges entscheiden müsste..
 
Last edited:
Wo wir gerade bei Trilogien sind ;):

Daniel Boll - einmal Padoukwurzel, zweimal Ceylon Eisenholz. Zweimal 1.2442, einmal Wolframdamast. Von Achim Wirtz …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC04939.jpg
    01 DSC04939.jpg
    380.3 KB · Views: 1,314
  • 02 DSC04941.jpg
    02 DSC04941.jpg
    378.8 KB · Views: 1,351
  • 03 DSC04958.jpg
    03 DSC04958.jpg
    347.2 KB · Views: 1,265
  • 04 DSC04952.jpg
    04 DSC04952.jpg
    326.1 KB · Views: 1,324
  • 05 DSC04945.jpg
    05 DSC04945.jpg
    307 KB · Views: 1,251
Soloauftritt Damast-Klappspaten: 2,6 mm schlank balliger Wirtz-Wolframdamast. Gesamtschneidenwinkel 20 Grad. 0,2 mm hinter der Wate …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


R’n‘R
 

Attachments

  • 01 DSC04997.jpg
    01 DSC04997.jpg
    362.4 KB · Views: 1,271
  • 02 DSC04999.jpg
    02 DSC04999.jpg
    384.1 KB · Views: 1,254
  • 03 DSC04994.jpg
    03 DSC04994.jpg
    313.5 KB · Views: 1,216
  • 04 DSC04988.jpg
    04 DSC04988.jpg
    326.7 KB · Views: 1,217
  • 05 DSC04991.jpg
    05 DSC04991.jpg
    384 KB · Views: 1,311
  • 06 DSC05001.jpg
    06 DSC05001.jpg
    322.6 KB · Views: 1,238
Hasenfüße:

Das Böse: 5,4 mm M390 Microclean - Hohlschliff - 0,5 mm hinter der Wate. Monstergroove-G10. Mein erstes Custom überhaupt …

Red Rock: 4 mm SB1 - Hohlschliff - 0,75 mm hinter der Wate …

Dorian Gray: 4 mm Shirogami 2 - schlank ballig auf definitiv Null - 0,3 mm hinter der Wate. Höllescharf …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC05008.jpg
    01 DSC05008.jpg
    322.8 KB · Views: 1,219
  • 02 DSC05010.jpg
    02 DSC05010.jpg
    305.6 KB · Views: 1,185
  • 03 DSC05016.jpg
    03 DSC05016.jpg
    394.8 KB · Views: 1,167
  • 05 DSC05028.jpg
    05 DSC05028.jpg
    323.4 KB · Views: 1,119
  • 06 DSC05031.jpg
    06 DSC05031.jpg
    334.5 KB · Views: 1,206
  • 07 DSC05022.jpg
    07 DSC05022.jpg
    382.7 KB · Views: 1,179
Hasenfüßchen:

Little Red Rock: Länge geschlossen 70 mm - Klingenlänge 50 mm - 4 mm M390 Microclean - Hohlschliff - 0,75 mm hinter der Wate …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC05057.jpg
    01 DSC05057.jpg
    330.5 KB · Views: 1,176
  • 02 DSC05055.jpg
    02 DSC05055.jpg
    364.5 KB · Views: 1,055
  • 03 DSC05054.jpg
    03 DSC05054.jpg
    360.9 KB · Views: 1,066
  • 04 DSC05046.jpg
    04 DSC05046.jpg
    321.9 KB · Views: 1,050
  • 05 DSC05074.jpg
    05 DSC05074.jpg
    388.5 KB · Views: 1,082
  • 06 DSC05076.jpg
    06 DSC05076.jpg
    398.2 KB · Views: 1,066
Der Kupferstecher - Hasenfuß-Carbon-SBH Gen2 Mid

Copperhead: Klingenlänge 85 mm - 3,4 mm 1.2442 - schlank ballig auf Null - 0,3 mm hinter der Wate - Kupfer-Griffplatte …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC05132.jpg
    01 DSC05132.jpg
    321.7 KB · Views: 981
  • 02 DSC05134.jpg
    02 DSC05134.jpg
    328.7 KB · Views: 1,007
  • 03 DSC05147.jpg
    03 DSC05147.jpg
    352.6 KB · Views: 984
  • 04 DSC05165.jpg
    04 DSC05165.jpg
    372.3 KB · Views: 951
  • 05 DSC05158.jpg
    05 DSC05158.jpg
    340.5 KB · Views: 951
Hasenfuß Tanto-Flipper (SGF)

Breaker: Klingenlänge 96 mm - 4 mm M390 Microclean - Hohlschliff - 0,7 mm hinter der Wate …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC05197.jpg
    01 DSC05197.jpg
    391.8 KB · Views: 878
  • 02 DSC05199.jpg
    02 DSC05199.jpg
    314.8 KB · Views: 916
  • 03 DSC05231.jpg
    03 DSC05231.jpg
    342.2 KB · Views: 922
  • 04 DSC05210.jpg
    04 DSC05210.jpg
    343.7 KB · Views: 884
  • 05 DSC05228.jpg
    05 DSC05228.jpg
    352.1 KB · Views: 903
  • 06 DSC05226.jpg
    06 DSC05226.jpg
    342.1 KB · Views: 910
  • 07 DSC05221.jpg
    07 DSC05221.jpg
    333.6 KB · Views: 878
Hasenfüße - Flipper (SGF) & Small SBH

Slow Rider: Klingenlänge 96 mm - 4 mm Böhler N690 - Hohlschliff - 0,65 mm hinter der Wate …

Lil‘ Devil: Klingenlänge 74,5 mm - 4 mm M390 Microclean - Hohlschliff - 0,5 mm hinter der Wate …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC05273.jpg
    01 DSC05273.jpg
    388.9 KB · Views: 835
  • 02 DSC05276.jpg
    02 DSC05276.jpg
    390 KB · Views: 816
  • 03 DSC05277.jpg
    03 DSC05277.jpg
    385.1 KB · Views: 827
  • 04 DSC05280.jpg
    04 DSC05280.jpg
    391.4 KB · Views: 835
  • 05 DSC05281.jpg
    05 DSC05281.jpg
    391.8 KB · Views: 805
  • 06 DSC05266.jpg
    06 DSC05266.jpg
    374 KB · Views: 802
  • 07 DSC05270.jpg
    07 DSC05270.jpg
    343.9 KB · Views: 846
Compañeros

Rick Hinderer Gen 4 XM-18 3.5″ Flipper - Fatty Harpoon Tanto - OD Green G-10 auf Kupferliner - Klingenlänge 90 mm -
4,7 mm CPM S35VN - Flachschliff - 0,9 mm hinter der Wate - Steel Flame Skull …

Hasenfuß Tanto-Flipper (SGF) - Klingenlänge 96 mm - 4 mm M390 Microclean - Hohlschliff - 0,7 mm hinter der Wate …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC03937-2.jpg
    01 DSC03937-2.jpg
    327 KB · Views: 748
  • 02 DSC03955-2.jpg
    02 DSC03955-2.jpg
    321 KB · Views: 748
  • 03 DSC03962-2.jpg
    03 DSC03962-2.jpg
    334.5 KB · Views: 783
  • 04 DSC03935-2.jpg
    04 DSC03935-2.jpg
    337.1 KB · Views: 788
  • 05 DSC03980-2.jpg
    05 DSC03980-2.jpg
    357.6 KB · Views: 802
  • 06 DSC05905 b-2.jpg
    06 DSC05905 b-2.jpg
    340.4 KB · Views: 740
Last edited:
FACOM - COUTEAU TOUT INOX A MOLETTE 840 LEPB

Ganzstahlfolder des französischen Werkzeugbauers Facom: Klingenlänge 73,5 mm - 3 mm Sandvik 12C27 (Made in Thiers) -
Distal tapered Blade - Flachschliff - 0,3 mm hinter der Wate - 188 Gramm (222 inkl. Gürtelholster) - Linerlock -
Öffnung per Daumenrad …

attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 DSC05513.jpg
    01 DSC05513.jpg
    334.2 KB · Views: 712
  • 02 DSC05514.jpg
    02 DSC05514.jpg
    352.2 KB · Views: 752
  • 03 DSC05512.jpg
    03 DSC05512.jpg
    391.7 KB · Views: 704
  • 04 DSC05518.jpg
    04 DSC05518.jpg
    388.8 KB · Views: 713
  • 05 DSC05515.jpg
    05 DSC05515.jpg
    340.9 KB · Views: 675
  • 06 DSC05517.jpg
    06 DSC05517.jpg
    352.8 KB · Views: 673
  • 07 DSC05545.jpg
    07 DSC05545.jpg
    295.9 KB · Views: 675
Last edited:
Emerson Mini A-100

Vorher: Saber Primary Grind & Chisel Secondary Bevel - 1 mm hinter der Wate

attachment.php



Nachher: Shallow Convex Scandi down to Zero - 0,4 mm hinter der Wate

attachment.php


attachment.php



R’n‘R
 

Attachments

  • 01 ND6_5999.jpg
    01 ND6_5999.jpg
    358.6 KB · Views: 647
  • 02 DSC05423.jpg
    02 DSC05423.jpg
    306.6 KB · Views: 615
  • 03 DSC07721.jpg
    03 DSC07721.jpg
    281.9 KB · Views: 679
Strider SNG CC Regrind

Vorher: Flachschliff mit V-Fase - Gesamtschneidenwinkel 40 Grad - 0,7 mm hinter der Wate

attachment.php



Nachher: Ballig auf Null - Gesamtschneidenwinkel 30 Grad - 0,5 mm hinter der Wate

attachment.php



R’n‘R
 

Attachments

  • 01 DSC05533 b.jpg
    01 DSC05533 b.jpg
    270.9 KB · Views: 592
  • 02 DSC07192.jpg
    02 DSC07192.jpg
    368.4 KB · Views: 646
Back